The wall should be strong and flat. Surface should be smooth. The wall should not be waxed/painted. Wall should be clean and dry if the tiling has to be done on plywood. The Surface of wall should be sealed with 50% volume mixture of PVA and water.
Mix the tiles from different cartons which will help in fine blending of shades.
Firstly, apply the high-quality ceramic adhesive on the wall and place the first tile on the corner. Apply even pressure of the four corners of tiles to ensure sticking Fill the area of wall that can be filled with the tiles without cutting and leave it for at least 12 hours. Fill the rest of area with the measured and cut tiles.
To ensure the proper contact of tile with the wall, evenly tamp the tiles with a rubber mallet tamp.
On the next day, the grouting is done. Apply the grout diagonally between the tiles using a sponge to fill the gaps between the tiles. Clean and wipe the surplus grout with a sponge.
To fit the tile in a curved surface of wash basin etc. measure and mark the curve on cardboard and place the cardboard on the tile to cut it.
To pass a pipe through the tile, the tile has to be cut iri a specific manner. Mark the position on the tile, which the tile will occupy. Draw a straight the passing through the centre of the circle. Cut the tile on the line drawn. Cut the semi-circles on each of the half and when these two halves placed together will form a hole.
Tile has to be cut in “L” shape for window recess. Cut a line from centre to edge and then draw a right angle line vertically down. Cut the tile to get an “L” shape that can fit in a window recess.
While laying the normal tiles, keep an empty space where accessory tiles will fit. Apply the adhesive on the back of accessory tile and then place it uniformly in the space and apply even pressure to place the accessory tile.
Apply masking tape to cover the area to be drilled. Mark the position of hole and drill the hole with lowest possible pressure on the drill.
Tiles laying is one of the most important steps in achieving a clean, durable, and visually balanced finish. At Nawton Tiles, we understand that great tile performance depends not only on product quality but also on correct installation methods, surface preparation, and finishing standards. Our ceramic tiles are designed to support reliable installation across residential, commercial, and large-scale project applications.
A well-executed tile laying process improves the appearance, strength, and lifespan of the finished surface. Correct alignment, level placement, and proper adhesive use help reduce movement, improve bonding, and create a premium final look. This is especially important for rectified tiles, large-format tiles, and high-traffic areas.
Before tile installation begins, the substrate should be clean, dry, level, and free from dust or loose material. Proper preparation helps the adhesive bond more effectively and reduces the risk of uneven surfaces, lippage, or future cracking. A stable base is essential for both wall and floor tile applications.
Using the correct adhesive, grout, spacers, and leveling tools ensures a better installation outcome. The materials used should match the tile type, room conditions, and expected traffic level. For polished, matte, decorative, and large-format ceramic tiles, selecting the right fixing system is essential for long-term performance.
Accurate alignment and consistent spacing create a more professional finish. During installation, tiles should be placed with care to maintain straight lines, clean joints, and uniform visual flow. This is particularly important in spaces where design continuity and surface symmetry are a priority.
Once the tiles are fixed and the adhesive has properly cured, grouting completes the installation process. The grout should be applied evenly and cleaned carefully to maintain the appearance of the surface. Final finishing includes edge cleaning, joint correction, and inspection to ensure the installation meets the required standard.
Nawton Tiles offers product categories that support a wide range of installation needs, including decorative tiles, polished tiles, natural wood tiles, matte tiles, and sanitaryware-related applications. These product lines are designed for use in homes, commercial interiors, hospitality spaces, and project-based developments. The homepage also highlights technical characteristics such as easy installation, slip resistance, waterproof surface, and rectified tile performance, which support reliable laying results. :contentReference[oaicite:1]{index=1}
Nawton Tiles is positioned as a premium ceramic tile manufacturer and exporter with a product range built for durability, precision, and design quality. The brand also emphasizes export reach across more than 50 countries and performance-oriented tile characteristics, making it a strong choice for projects that require dependable supply and consistent finishing. :contentReference[oaicite:2]{index=2}
If you are planning a residential or commercial tile project, correct laying methods will improve both appearance and durability. Use this page to guide installation planning, product selection, and finishing standards for better long-term results.
